Tools centre
Aluminium profile technical tools
A technical toolkit for engineers and installation teams: 3D configuration by system, cross-section & specification lookup, profile weight calculation, single/insulated glass weight, 6 m bar cutting optimisation and opening material estimation. Use them right in your browser and move straight to a quote request.
Aluminium weight calculator
Choose a profile system, then enter the length and number of bars to estimate weight from the catalogue mass per metre.
Cửa lùa / trượt · Thanh nhôm định hình Hệ 700 — Khung đứng, mã QM-7002. Quy cách & khối lượng theo catalogue kỹ thuật Quang Minh.
Standard factory bar length is 6000 mm.
Result
Weight per metre
0,487 kg/m
Total weight
2,92 kg
Total length
6 m
- System code
- Hệ 700
- Hợp kim
- Al 6063-T5
- Cross-section
- Box 70×30 mm · wall 1.2 mm · 1 chambers
Weight is calculated from the catalogue kg/m value for each profile code. Figures are indicative for budgeting purposes.
The figures above are technical estimates for quick budgeting and do not replace an engineer’s shop drawings and structural calculations. For an official quote based on drawings, please submit a quote request or contact our technical team.